Specifications

• Current Consumption: 30 A at nominal load
• Product Destination: asynchronous motors
• Range Of Product: Altistart 01
• Product Or Component Type: soft starter
• Phase: 3 phase
• Power Dissipation In W: 4 W at full load and at end of starting || 64 W in transient state
• Utilisation Category: AC-53B EN/IEC 60947-4-2
• Icl Starter Rating: 6 A
• Type Of Start: start with voltage ramp
• [Us] Rated Supply Voltage: 460…480 V – 10…10 %
• Product Specific Application: simple machine
• Maximum Horse Power Rating: 2 hp, 3 phase 460…480 V || 3 hp, 3 phase 460…480 V
• Device Short Name: ATS01

Contractual warranty

• Warranty: 18 months

Complementary

• Electrical Connection: 4 mm screw clamp terminal – rigid 1 1…10 mm AWG 8 power circuit || screw connector – flexible without cable end 2 0.5…1.5 mm AWG 16 control circuit || screw connector – rigid 1 0.5…2.5 mm AWG 14 control circuit || 4 mm screw clamp terminal – rigid 2 1…6 mm AWG 10 power circuit || screw connector – rigid 2 0.5…1 mm AWG 17 control circuit || screw connector – flexible with cable end 1 0.5…1.5 mm AWG 16 control circuit || 4 mm screw clamp terminal – flexible without cable end 1 1.5…10 mm AWG 8 power circuit || screw connector – flexible without cable end 1 0.5…2.5 mm AWG 14 control circuit || 4 mm screw clamp terminal – flexible with cable end 2 1…6 mm AWG 10 power circuit || 4 mm screw clamp terminal – flexible without cable end 2 1.5…6 mm AWG 10 power circuit
• Network Frequency: 47.5…63 Hz
• [Uc] Control Circuit Voltage: built into the starter
• Height: 124 mm
• Deceleration Time Symb: adjustable from 1 to 10 s
• Discrete Input Voltage: 24…40 V
• Maximum Switching Current: relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive || relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
• Discrete Output Voltage: 24 V 6…30 V) open collector logic
• Marking: CE
• Net Weight: 0.42 kg
• Discrete Output Current: 2 A DC-13 || 3 A AC-15
• Function Available: integrated bypass
• Supply Voltage Limits: 414-528 V
• Starting Time: 1 s / 100 || 5 s / 20 || 10 s / 10 || adjustable from 1 to 10 s
• Minimum Switching Current: 10 mA 6 V DC relay outputs
• Discrete Input Type: logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
• Assembly Style: with heat sink
• Compatibility Code: ATS01N2
• Output Voltage: <= power supply voltage
• Operating Position: vertical +/- 10 degree
• Display Type: 1 LED Green)starter powered up || 1 LED Yellow)nominal voltage reached
• Width: 45 mm
• Depth: 131 mm
• Discrete Input Logic: positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
• Starting Torque: 30…80 % of starting torque of motor connected directly on the line supply
• Tightening Torque: 1.9-2.5 N.m || 0.5-0.5 N.m
• Supply Frequency: 50…60 Hz – 5…5 %
• Discrete Output Type: open collector logic LO1 end of starting signal || relay outputs R1A, R1C NO

Offer Sustainability

• Rohs Exemption Information: Yes
• Mercury Free: Yes
• Toxic Heavy Metal Free: Yes
• Reach Regulation: Free of Substances of Very High Concern above the threshold
• California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Reach Free Of Svhc: Yes
• Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation: X
• Circularity Profile: ENVEOLI100217EN
• Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Environment

• Product Certifications: CCC || UL || GOST || C-tick || CSA || B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
• Standards: EN/IEC 60947-4-2
• Electromagnetic Compatibility: conducted and radiated emissions level B CISPR 11 || immunity to electrical transients level 4 IEC 61000-4-4 || immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 || micro-cuts and voltage fluctuation IEC 61000-4-11 || voltage/current impulse level 3 IEC 61000-4-5 || conducted and radiated emissions level B IEC 60947-4-2 || damped oscillating waves level 3 IEC 61000-4-12 || electrostatic discharge level 3 IEC 61000-4-2 || EMC immunity EN 50082-1 || EMC immunity EN 50082-2 || harmonics IEC 1000-3-2 || harmonics IEC 1000-3-4 || immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
• Ambient Air Temperature For Operation: -10-40 C without derating) || 40-50 C with current derating of 2 % per C)
• Shock Resistance: 15 gn 11 ms EN/IEC 60068-2-27
• Vibration Resistance: 1 gn 13-150 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
• Pollution Degree: 2 EN/IEC 60947-4-2
• Ambient Air Temperature For Storage: -25-70 C EN/IEC 60947-4-2
• Relative Humidity: 5-95 % without condensation or dripping water EN/IEC 60068-2-3
• Ip Degree Of Protection: IP20
• Operating Altitude: <= 3280.84 ft (1000 m) without derating || > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m

Downloads

Spec Sheet

CAD

Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUF (dxf)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUT (dxf)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUT (dwg)
ATS01N206RT_CAD_DOC – ATS01N206RT_2D+Right+Side+View (dwg)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUA (dxf)
ATS01N206RT_CAD_DOC – ATS01N206RT_2D+Right+Side+View (dxf)
ATS01N206RT_CAD_DOC – ATS01N206RT_3D (stp)
ATS01N206RT_CAD_DOC – ATS01N206RT_2D+Front+View (dxf)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUA (dwg)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUF (dwg)
ATS01N206RT_CAD_DOC – ATS01N206RT_2D+Front+View (dwg)

Catalog

Altistart 01 Soft Starters Catalog – ATS01eCatalog (pdf)
Catalog: Soft starters Altistart 01 – DIA2ED2140603EN (pdf)
Industrial Control Panel Solutions Catalog – 8800CT1801 (pdf)

Certificate

ATS01 CSA CERTIFICATE – CoFC_80071573_EN (pdf)
ATS01 CSA Certificate of Compliance – COFC_80094867_EN (pdf)
E184727 UL GENERIC CERTIFICATES – E184727+UL+CERTIFICATES (pdf)

Instruction sheet

Instruction sheet – ATS01N2..LU/QN/RT – ATS01_IS_ATS01N2_1624686_05 (pdf)

Technical Drawing

Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUR (dwg)
ATS01N206RT_2D_Drwng_PDF – ATS01N206RT_2D+Sales+Drawing (pdf)
Soft start/soft stop unit Power : 0.75 to 5.5 kW – U 3-phase = 200 to 240 V or 380 to 415 V or 440 to 430 V – ATS01N206LUR (dxf)

Declaration of conformity

ATS01 EU DECLARATION – IA_ATS01_-_EU_Declaration_2021-09.docx (pdf)
ATS01 C-TICK certificate of conformity – ATS01+C-TICK+certificate+of+conformity (pdf)
ATSU01-ATS01_CCC_SDOC_PE – CCC+SDoC_ATSU01N206LT+to+ATS01N232_2020980304001805+-+CQC2004010304137974_CN (pdf)
ATS01_UK_DECLARATION – UK_ATS01_-_UK_Declaration_2021-09.docx (pdf)

Circularity Profile

ALTISTART 01, 0.75 15 kW, Product End-of-Life Instructions – ENVEOLI100217EN_V0 (pdf)