Specifications

• Range Of Product: TeSys K
• Contactor Application: resistive load
• Product Or Component Type: contactor
• Range: TeSys
• Pole Contact Composition: 2 NO + 2 NC
• Utilisation Category: AC-1
• [Ie] Rated Operational Current: 20 A 50 C) <= 440 V AC AC-1 power circuit || 16 A 70 C) 690 V AC AC-1 power circuit
• Poles Description: 4P
• Device Short Name: LP1K

Contractual warranty

• Warranty: 18 months

Complementary

• [Ue] Rated Operational Voltage: power circuit 690 V AC 50/60 Hz
• Height: 58 mm
• Average Impedance: 3 mOhm – Ith 20 A 50 Hz power circuit
• Control Circuit Voltage Limits: operational 0.8…1.15 Uc 50 C) || drop-out 0.1…0.75 Uc 50 C)
• [Ith] Conventional Free Air Thermal Current: 20 A 50 C power circuit
• Mounting Support: plate || rail
• Safety Reliability Level: B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
• Hold-In Power Consumption In W: 3-3 W 20 C
• Rated Breaking Capacity: 110 A 415 V IEC 60947 || 110 A 440 V IEC 60947 || 80 A 500 V IEC 60947 || 110 A 220…230 V IEC 60947 || 110 A 380…400 V IEC 60947 || 70 A 660…690 V IEC 60947
• Irms Rated Making Capacity: 110 A AC power circuit NF C 63-110 || 110 A AC power circuit IEC 60947
• Associated Fuse Rating: 25 A gG <= 440 V power circuit || 25 A aM power circuit
• Net Weight: 0.225 kg
• [Uimp] Rated Impulse Withstand Voltage: 8 kV
• Coil Technology: built-in bidirectional peak limiting diode suppressor
• Flame Retardance: V1 conforming to UL 94 || requirement 2 conforming to NF F 16-101 || requirement 2 conforming to NF F 16-102
• Maximum Operating Rate: 3600 cyc/h
• Inrush Power In W: 3-3 W 20 C)
• Mechanical Durability: 10 Mcycles
• Operating Time: 30…40 ms coil energisation and NO closing || 10 ms coil de-energisation and NO opening || 25…35 ms coil energisation and NC opening || 15 ms coil de-energisation and NC closing
• Width: 45 mm
• Tightening Torque: 0.8-1.3 N.m screw clamp terminals Philips No 2 || 0.8-1.3 N.m screw clamp terminals flat 6 mm || 0.8-1.3 N.m screw clamp terminals pozidriv No 2
• Overvoltage Category: III
• Depth: 57 mm
• [Ui] Rated Insulation Voltage: power circuit 600 V UL 508 || power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA C22.2 No 14

Offer Sustainability

• Rohs Exemption Information: Yes
• Mercury Free: Yes
• Environmental Disclosure: ENVPEP1503003EN
• Sustainable Offer Status: Green Premium product
• Toxic Heavy Metal Free: Yes
• Reach Regulation: Free of Substances of Very High Concern above the threshold
• California Proposition 65: WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
• Reach Free Of Svhc: Yes
• Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation: Pro-active China RoHS declaration (out of China RoHS legal scope)
• Circularity Profile: ENVEOLI1503003EN
• Eu Rohs Directive: Compliant

Environment

• Product Certifications: CB Scheme || CCC || UL || CSA || EAC || CE || UKCA
• Ambient Air Temperature For Operation: -25-50 C
• Standards: EN/IEC 60947-4-1 || GB/T 14048.4 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || JIS C8201-4-1
• Ambient Air Temperature For Storage: -50-80 C
• Operating Altitude: 6561.68 ft (2000 m) without derating

Downloads

Spec Sheet

CAD

TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-back (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_3D-simplified (stp)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-front (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-isometric (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-left (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365 (pdf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-bottom (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-front (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-right (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-right (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-top (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-bottom (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-isometric (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-back (dxf)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-left (dwg)
TeSys k – CONTACTOR – 3D CAD – MCADPP0003365_2D-top (dxf)

Instruction sheet

LC1-K contactor – Instruction Sheet – 1378085_01A55_15 (pdf)
CA2/CA3/CA4/LC./LP.-K Add-on contact blocks and surge supressor – Instruction sheet – 1379131_01A55-09 (pdf)

Certificate

UL_Certificate_TeSys K_LP1K, LP4K, LC7K, LC.KS207-S335 – E48539-19930524-CertificateofCompliance (pdf)
CSA Certificate_ TeSys K_LC.K_LP.K_CA.KN_CAK_LA1KN_LA4K – COFC_80120004_EN (pdf)

Environmental Disclosure

PEP_TeSys LC1K09-K16 – PEP+ecopassport+SCHN-2015-025-EN_1 (pdf)

Declaration of conformity

EU_Declaration_TeSysK_LC.K&LP.K06-16 – PP_EU_Doc_LC_K_LP_K06-16_SC16040406E.docx (pdf)
UKCA Declaration TeSys K_LC.K,LP.K – UK_Doc_LC_K_LP_K06-16_SC16040406A-UK.docx (pdf)

Circularity Profile

Eoli_Contactors, TeSys K contactor – 3P – AC-3 <= 440 V 9 A – 1 NO aux. – 220…230 V AC coil – EoLI_ENVEOLI1503003_1 (pdf)