This treadle belt made by Alphasew will fit onto all treadle sewing machines, no matter what the age might be.

Installation: Measure against the old belt then cut to the proper length. Puncture the end of the belt without the metal hook with a small nail approximately 1/4″ from the end. Push the metal hook through the hole that you had made on the other side and bend over the hook after the fit is satisfactory.

Measurements:
Length: 68″-72″ – (All treadle sewing machine’s require less than 68″)
Width: 1/4″

To puncture the hole in your belt, we recommend using Leather Belt Plier #119-6.