Specifications

• Number Of Slave: 512
• Integrated Connection Type: Interbus InterBus Club 9-way male isolated RS485 SUB-D 1 twisted shielded pair input bus) || Interbus InterBus Club 9-way female isolated RS485 SUB-D 1 twisted shielded pair output bus) || Interbus InterBus Club HE-13 RS232 port) || Interbus InterBus Club 8-way female RS232 port)
• Range Of Product: Modicon STB distributed I/O solution
• Number Of Segments: 1 primary, maximum 6 extensions
• Transmission Rate: 500 kbit/s 0-12800 m for the bus between stations || 500 kbit/s 0-400 m per bus segment between stations || 500 kbit/s 0-50 m for the installation bus
• Product Or Component Type: standard Network Interface Module
• Structure Type: industrial field bus (Generation4)

Contractual warranty

• Warranty: 18 months

Complementary

• Height: 40 mm
• Supply Voltage Limits: 19.2-30 V
• Number Of Addressable I/O Module: 0-32 per island
• Status Led: 1 LED (Green) BA || 1 LED (Green) island state (RUN) || 1 LED (Green) power supply (PWR) || 1 LED (Green) RC || 1 LED (Red) module error (ERR) || 1 LED (Red) RD || 1 LED (Yellow) test mode
• Output Voltage: 5.25 V DC +/- 0.21 %)logic bus
• Maximum Supply Current: 700 A
• Communication Service: implicit exchange of process data || logical addressing || diagnostics
• Marking: CE
• Width: 128.3 mm
• Overvoltage Category: II
• Depth: 70 mm
• Power Supply Type: SELV
• Maximum Output Impedance: 0.05 Ohm 100000 kHz
• Input Current: 430 mA supply circuit
• [Us] Rated Supply Voltage: 24 V DC
• Net Weight: 0.155 kg
• Nominal Output Current: 0.575 A 60-70 C || 1.2 A

Offer Sustainability

• China Rohs Regulation: X
• Rohs Exemption Information: Yes
• Mercury Free: Yes
• Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)
• Reach Regulation: Reference contains Substances of Very High Concern above the threshold
• California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Environment

• Product Certifications: CSA || C-tick || UL || FM Class 1 Division 2 || ATEX Cat 3G
• Pollution Degree: 2 IEC 60664-1
• Ambient Air Temperature For Storage: -40-85 C
• Relative Humidity: 95-95 % 60-60 C without condensation
• Ambient Air Temperature For Operation: 0-60 C without derating) || -25-70 C with derating factor)
• Electromagnetic Compatibility: immunity to electromagnetic interference IEC 61131-2
• Shock Resistance: 30 gn 11 ms IEC 88 reference 2-27
• Vibration Resistance: 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
• Operating Altitude: <= 6561.68 ft (2000 m)
• Ip Degree Of Protection: IP20 conforming to EN 61131-2 class 1

Downloads

Spec Sheet

CAD

Network Interface Module 3 – 3D CAD – MCADID0005041_2D-isometric (dwg)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-front (dwg)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-left (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-bottom (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-back (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-isometric (dxf)
Network Interface Module 3 – STB-NET3_CAD2D_all (dwg)
Network Interface Module 3 – STB-NET3_CAD2D_all (pdf)
Network Interface Module 3 – STB-NET3_CAD2D_all (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-right (dwg)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-front (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-top (dxf)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-bottom (dwg)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-back (dwg)
Network Interface Module 3 – STB-NET3_CAD2D_all.wmf
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-top (dwg)
Network Interface Module 3 – STB-NET3_CAD2D_all.dwf
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-left (dwg)
Network Interface Module 3 – 3D CAD – MCADID0005041_3D-simplified (stp)
Network Interface Module 3 – 3D CAD – MCADID0005041_2D-right (dxf)

Declaration of conformity

Modicon STB, Declaration of Conformity, UKCA, Schneider Electric – UK_DoC_STB_May2022.docx (pdf)
ACMA_RCM_STB_FEB2015 – ACMA_RCM_STB_FEB2015 (pdf)
DCC_STB_JUL2016 – DCC_STB_JUL2016 (pdf)

Certificate

Modicon STB, Certificate, IACS, ABS, Marine – Certificate+No.23-2343675-PDA+signed (pdf)
Modicon STB, Certificate, IACS, DNV-GL, Marine – DNV-GL_TAA0000064_STB_JAN21 (pdf)
Modicon, Certificate, UL, Ordinary Location – UL_E486184_NRAQ7_ALL_Jan2023 (pdf)
EAC_RUCFRME83B00132_STB – EAC_RUCFRME83B00132_STB_JUL2014 (pdf)
Modicon STB, Certificate, CSA, Ordinary Location – CSA_225844_2591645_STB_AUG2017 (pdf)
Modicon STB, Certificate, cCSAus, Hazardous Location – HazLoc_cCSAus_225844_700136731_STB_NOV2017 (pdf)
Modicon, Certificate, UL, Ordinary Location – UL_E486184_NRAQ_ALL_Jan2023 (pdf)

Catalog

Catalogue: IP 20 distributedinputs/outputsModicon STB (LR PDF) – MKTED2130401EN+(web) (pdf)

User guide

STBNIB2212 Standard INTERBUS Network Interface|Module, Applications Guide – 31004624K01000 (pdf)