Specifications

• Product Or Component Type: variable speed drive
• Ip Degree Of Protection: IP20
• Communication Port Protocol: Modbus
• Nominal Output Current: 10 A
• Product Specific Application: simple machine
• Maximum Horse Power Rating: 3 hp
• Supply Frequency: 50/60 Hz +/- 5 %
• Range Of Product: Altivar 12
• Motor Power Kw: 2.2 kW
• [Us] Rated Supply Voltage: 200…240 V – 15…10 %
• Mounting Mode: cabinet mount
• Emc Filter: without EMC filter

Contractual warranty

• Warranty: 18 months

Complementary

• Prospective Line Isc: 5 kA
• Network Frequency: 50-60 Hz
• Power Dissipation In W: forced cooling 85.0 W
• Line Current: 14.9 A 100 V heavy duty) || 12.5 A 120 V heavy duty)
• Asynchronous Motor Control Profile: quadratic voltage/frequency ratio || sensorless flux vector control || voltage/frequency ratio (V/f)
• 4 Quadrant Operation Possible: false
• Relative Symmetric Network Frequency Tolerance: 5 %
• Apparent Power: 5.2 kVA 240 V heavy duty)
• Net Weight: 1.2 kg
• With Safety Function Safe Direction (Sdi): false
• Type Of Polarization: no impedance
• Frequency Resolution: analog input converter A/D, 10 bits || display unit 0.1 Hz
• Switching Frequency: 2…16 kHz adjustable || 4…16 kHz with derating factor
• Maximum Transient Current: 15.0 A 60 s heavy duty) || 16.5 A 2 s heavy duty)
• Communication Service: read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
• Analogue Input Number: 1
• Motor Slip Compensation: adjustable || preset in factory
• Discrete Output Number: 2
• With Safety Function Safe Position (Sp): false
• Method Of Access: server Modbus serial
• With Safety Function Safely Limited Position (Slp): false
• With Safety Function Safe Operating Stop (Sos): false
• Number Of Addresses: 1-247
• Speed Range: 1-20
• Discrete Input Number: 4
• Linearity Error: +/- 0.3 % of maximum value analogue input
• With Sft Fct Safe Stop 2 (Ss2): false
• With Safety Function Safe Stop 1 (Ss1): false
• Width: 105 mm
• Transmission Rate: 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
• Depth: 131.2 mm
• Sampling Duration: 20 ms +/- 1 ms logic input || 10 ms analogue input
• Maximum Output Frequency: 4 kHz
• With Safety Function Safe Brake Management (Sbc/Sbt): false
• Height: 143 mm
• Acceleration And Deceleration Ramps: linear from 0 to 999.9 s || S || U
• Time Constant: 20 ms +/- 1 ms for reference change
• Maximum Output Voltage: 240 V
• Base Load Current At High Overload: 10.0 A
• Speed Drive Output Frequency: 0.5-400 Hz
• Transmission Frame: RTU
• With Safety Function Safe Speed Monitor (Ssm): false
• Relay Output Number: 1
• Transient Overtorque: 150-170 % of nominal motor torque depending on drive rating and type of motor
• With Safety Function Safe Torque Off (Sto): false
• Data Format: 8 bits, configurable odd, even or no parity
• Connector Type: 1 RJ45
• Analogue Output Number: 1
• Physical Interface: 2-wire RS 485
• Insulation: electrical between power and control
• Tightening Torque: 1.2 N.m
• Continuous Output Current: 10 A 4 kHz
• With Safety Function Safe Programmable Logic: false
• Brake Chopper Integrated: false
• Nominal Switching Frequency: 4 kHz
• Quantity Per Set: set of 1
• Braking To Standstill: by DC injection
• Protection Type: line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by continuous calculation of It
• With Safety Function Safely Limited Speed (Sls): false

Offer Sustainability

• Mercury Free: Yes
• Reach Regulation: Reference contains Substances of Very High Concern above the threshold
• Weee: The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
• China Rohs Regulation: X
• Rohs Exemption Information: Yes
• California Proposition 65: WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
• Eu Rohs Directive: Pro-active compliance (Product out of EU RoHS legal scope)

Environment

• Product Certifications: NOM || CSA || C-tick || UL || GOST || RCM || KC
• Maximum Deflection Under Vibratory Load (During Operation): 1.5 mm at 2…13 Hz
• Standards: UL 508C || UL 618000-5-1 || EN/IEC 61800-5-1 || EN/IEC 61800-3
• Vibration Resistance: 1 gn 13-200 Hz)EN/IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) – drive unmounted on symmetrical DIN rail – EN/IEC 60068-2-6
• Shock Resistance: 15 gn 11 ms EN/IEC 60068-2-27
• Regulation Loop: adjustable PID regulator
• Operating Altitude: <= 3280.84 ft (1000 m) without derating || > 3280.84…9842.52 ft (> 1000…3000 m) with current derating 1 % per 100 m
• Overvoltage Category: class III
• Environmental Class (During Operation): class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
• Electromagnetic Emission: radiated emissions environment 1 category C2 EN/IEC 61800-3 2…16 kHz shielded motor cable || conducted emissions with additional EMC filter environment 1 category C1 EN/IEC 61800-3 4…12 kHz shielded motor cable <5 m || conducted emissions with additional EMC filter environment 1 category C2 EN/IEC 61800-3 4…12 kHz shielded motor cable <20 m || conducted emissions with additional EMC filter environment 2 category C3 EN/IEC 61800-3 4…12 kHz shielded motor cable <20 m
• Maximum Acceleration Under Shock Impact (During Operation): 150 m/s at 11 ms
• Pollution Degree: 2
• Electromagnetic Compatibility: electrical fast transient/burst immunity test level 4 EN/IEC 61000-4-4 || electrostatic discharge immunity test level 3 EN/IEC 61000-4-2 || immunity to conducted disturbances level 3 EN/IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3 || surge immunity test level 3 EN/IEC 61000-4-5 || voltage dips and interruptions immunity test EN/IEC 61000-4-11
• Ambient Air Temperature For Operation: -10-50 C without derating || 50-60 C with current derating 2.2 % per C
• Volume Of Cooling Air: 14.8 m3/h
• Marking: CE
• Maximum Acceleration Under Vibrational Stress (During Operation): 10 m/s at 13…200 Hz
• Noise Level: 50 dB
• Ambient Air Temperature For Storage: -25-70 C
• Relative Humidity: 5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
• Assembly Style: with heat sink
• Operating Position: vertical +/- 10 degree
• Ambient Air Transport Temperature: -25-70 C

Downloads

Spec Sheet

Data Bulletin

Grounding and Bonding Practices when Installing Variable Frequency Drives Data Bulletin – 8800DB1501 (pdf)
Variable Frequency Drives and Short-Circuit Current Ratings Data Bulletin – 8800DB1203R01_17 (pdf)
Service Guide for AC Drives and Soft Starters Data Bulletin – 8800DB0101 (pdf)

CAD

Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-top (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-front (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-back (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-back (dxf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-isometric (dwg)
AC DRIVE, 3 HP, 230V 3 PHASE IN, 230V OUT – ATV12HU22M3 (pdf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-front (dxf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-right (dwg)
AC DRIVE, 3 HP, 230V 3 PHASE IN, 230V OUT – ATV12HU22M3.DWF
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-left (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-isometric (dxf)
AC DRIVE, 3 HP, 230V 3 PHASE IN, 230V OUT – ATV12HU22M3 (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-top (dxf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_3D-simplified (stp)
AC DRIVE, 3 HP, 230V 3 PHASE IN, 230V OUT – ATV12HU22M3.DXF
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862 (pdf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-left (dxf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-right (dxf)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-bottom (dwg)
Variable speed drive ATV12 – 3f – 200V Heat sink – 3D CAD – MCADID0000862_2D-bottom (dxf)

Brochure

2020 Global Food & Beverage Digital Transformation Benefits Report – Brochure – 998-20706023_GMA-US_F%26B+Digital+Transformation+Report (pdf)
EcoStruxure Building IoT Solutions eBrochure – EcoStruxure-Building-Brochure-998-20276330_GMA-US-2018 (pdf)
Altivar 12 Variable Speed Drives Brochure – 8800BR0902 (pdf)
AC Drives Product Support Group Premier Plan Brochure – 998-20183222 (pdf)
Altivar Outdoor Variable Speed Drives Brochure – Altivar+Outdoor (pdf)

User guide

ATV12 user manual – ATV12_user_manual_EN_BBV28581_04 (pdf)
ATV12 Modbus Communication Manual – ATV12_Modbus_EN_BBV28590_02 (pdf)

Handout

Altivar and Altistart Programming Cable Handout – 8800HO1503 (pdf)

Catalog

Altivar 12 Variable speed drives – DIA2ED2130101EN+(web) (pdf)
Digest Catalog 26: AC Drives and Soft Starters (OCT 2021) – 0100CT1901_SEC-26_OCT2021 (pdf)
Altivar 12 Variable Speed Drives Catalog (US 2014) – ATV12eCatalog (pdf)
Automation and Control Essentials Catalog 2023-EN – DIA5ED2170101EN_v7_Web (pdf)

Certificate

ATV12_SE_SHORT_CIRCUIT_PROTEC. – SE+Declaration+on+Short+Circuit+to+PE+on+motor+output+-+ATV12 (pdf)
ATV12HU22M3_KC_CERTIFICATE – +ATV12HU22M3 (pdf)
ATV12 UL CERTIFICATE – ATV12+UL+CERTIFICATE (pdf)
ATV12_CSA_CERTIFICATE – CoFC_80063341_EN (pdf)

Instruction sheet

ATV12 Variable Speed Drives Extended Short Circuit Ratings – Instructions – S1A35727+Rev.00 (pdf)
1) ATV12 Quick Start annex – SCCR – ATV12_Quick+Start_annex_S1A58684_04 (pdf)
Instruction sheet substitution ATV11-ATV12 – ATV11_IS_substitution_ATV11-ATV12_S1A33276_02 (pdf)
1) ATV12 Getting Started – ATV12_Getting_started_EN_S1A56146_03 (pdf)
Instruction sheet – Braking Resistor: VW3A7723, VW3A7724, VW3A7725 – ATV12_312_IS_braking_resistor_BBV51918_01 (pdf)

Software – Release

SoMove (FDT Standalone) – SoMove_V2.9.5_ReadMe (pdf)
SoMove (FDT Standalone) – SoMove_V2.9.5_ReleaseNotes (pdf)
SoMove (FDT Standalone) – SoMove_V2.9.5.exe

Declaration of conformity

ATV12_UK_DECLARATION – UK_ATV12_UK_DECLARATION_2021.docx (pdf)
ATV12 EU DECLARATION – ICD_ATV12_EU_Declaration_2023_06 (pdf)

DTM files

Altivar DTM Library: ATV12, ATV31/312, ATV32, ATV61, ATV71, ATV LIFT, ATV212 – AltivarDtmLibrary-V12.8.0.exe
Altivar DTM Library: ATV12, ATV31/312, ATV32, ATV61, ATV71, ATV LIFT, ATV212 – AltivarDtmLibrary_v12.8.0_ReleaseNotes (pdf)

Videos

Configuring the ATV12 for Local Mode Operation | Schneider Electric Support Switching Altivar 12 Speed Control from Terminals to Remote Keypad | Schneider Electric Support